STANDARD SIZES OF WALLURE STONE VENEERS 

NormSlate, TranSlate, ThinSlate: 122 x 61 cm, 4 x 2 feet, 0.74 sqm 
SandStone: 110 x 68 cm, 3.6 x 2.2 feet, 0.74 sqm or 136 x 55 cm, 4.4 x 1.8 feet, 0.74 sqm

COLOR VARIATIONS 

Wallure Stone Veneer is a Natural Stone Veneer, color & texture variations are the property of the material. Texture variations with color difference are an inherent part of the natural beauty of quarried material. Stone Veneer can not be guaranteed to match with each Lot, it is recommended that material should be accepted in lots of 20, 40, 50 sheets to match. Large orders will be executed in bundles of 25 with 2-3 matching lots in each bundle. Exceptions of large lots are also a possibility. 

USES FOR LAMINATION & DIRECT GLUING 

‘Wallure Stone Veneer is used for wall panel on MDF, HDF board’s application, furniture, woodworking machines, round column cladding and numerous interior and exterior applications. TransSlate, ThinSlate or SandStone Veneer is not recommended for flooring or countertop applications due to the thin soft nature of the Stone Veneer. NormSlate Veneer can directly be glued to concrete floors and walls with the help of epoxy and other PU glues. 

SUBSTRATES 

Stone Veneer can be applied to MDF, HDF boards, Styrofoam sheets, melamine, concrete, brick, concrete blocks & slabs, mortar plastered walls, drywall, plywood, acrylic and other plastic sheets. 

LIGHT, HEAT & TEMPERATURE RESISTANCE 

Stone Veneer has natural stone surface layer surface which acts as a UV light or UV rays protector and will resist high sun conditions for years. When it is glued to a substrate, Slate Stone veneer will handle high thermal contraction and or expansions of most standard construction materials. Stone Veneer will handle both high temperatures and freezing without cracking. 

TranSlate Veneer may be used in illumination application such as lamp shades or backlight applications as translucent material or the other translucency applications. 

Diamond blades used for marble & stone cutting can be used for cutting Stone Veneer. Metal cutting tools also can be used to cut the Stone Veneer. Any standard carbide or diamondsaw blades would work just as well.

CURVATURE and BENDING 

Stone Veneer can be bent with same flexibility as any plastic sheet product. The backing used gives it enough strength and flexibility. Stone Veneer can be bent in concave & convex forms, or arched or radial forms depending on the nature of curve. Stone Veneer can be bent or flexed to a radius of 380mm along the 1200mm length. The 600mm width will also have a slight flex to it, but is not recommended for bending. Due to the nature of the different thickness of the individual items, the degree of radius varies per item. We recommend testing the flax of the considered item prior to final installation. 

INSTALLATION 

Stone Veneer can be glued to surfaces using most standard laminate adhesives having a thick body or foaming quality. Prior to application of the glue clean, brush and de-grease the receiving surface or dust, oils or any othèr contaminants. In same installations, and depending upon the adhesive used, it may be necessary to prepare the back of the thin Stone veneer with solvent or recommended primer by the adhesive manufacture. We recommend making a test area with any adhesive prior to final application. 

ADHESIVES 

Knowledge of the special adhesives, and the respective surface for which they are recommended, is critical in obtaining superior installation when using Stone veneer. We recommend testing the selected adhesive prior to proceeding with installation. Humidity and temperature of the environment is to be evaluated first. If the application is outdoors, consideration to thermal expansion should be taken into account. Stone is a veneer, it must expand and contract which is recommended by the adhesive manufacturer, the bond must be tested by the installer prior to final installation.

Recommended types of adhesives & fillers: 

• Polyester-based gap filler putties 
• Silicone (with primer only) 
• Epoxies 
• Polyurethane wood glues 
• Thick latex-type adhesive, thin set etc. (uses only where air-drying can take place)
• Construction grade multi-purpose adhesives (eg. Liquid Nails or PLPremium Polyurethane or similar)

Note: The back of Stone Veneer may require a filler-type adhesive in some cases. Polyurethane wood glues work well for most applications to fill gaps. For wet environment such as shower and bathroom applications, the use of epoxy is best. Note: Pressure sensitive adhesives are also recommended due to the even backing of the Stone Veneer. Now Pressure sensitive glues are applied on the back of Stone Veneer and is supplied with the paper cover to use it as peel and stick material ready to use. 

TILING

Stone Veneer can be used to create a tiled effect by leaving a grout joint between cut pieces of material. Test results have shown the use of water-based epoxy grouts work well to fill between the cut veneers. By removing the material just under the grout joint, a deeper grout can be achieved it desired. Epoxy grouts are available in many colors to match or coordinate with the different colors of Slate Stone. On final clean up of the epoxy with a sponge, the epoxy can also be used to seal and fill the Stone surface. It is recommended in this installation that the entire surface of the Slate Stone be sealed with epoxy as a final step to ensure complete satisfaction.

Final Thoughts

Stone veneer sheets represent the perfect fusion of natural beauty and modern engineering. With options like NormSlate, TranSlate, ThinSlate, and SandStone, these lightweight yet durable materials offer incredible versatility—from wall cladding and furniture applications to creative installations like backlit panels and curved surfaces. Their ability to bend, resist extreme temperatures, and adhere to various substrates makes them an ideal choice for both indoor and outdoor projects where traditional stone would be impractical.

Whether you’re looking to create stunning accent walls, upgrade kitchen backsplashes, or add elegant touches to commercial spaces, Wallure stone veneer sheets deliver authentic stone aesthetics without the weight, cost, or installation complexity of full slabs. Their natural color variations and flexible installation options using standard adhesives make them accessible to both professional contractors and DIY enthusiasts seeking premium results.

Ready to transform your space with premium Wallure stone veneer sheets? Contact Fakhree Marbles today for samples, expert consultation, and competitive pricing. Experience the perfect blend of natural stone beauty and modern convenience—your dream project is just a click away.